Powder metallurgy press and Forging press

    Dongguan Yihui Hydraulic Machinery Co., Ltd, is experienced in designing and manufacturing various types of hydraulic press machines and servo press, Such as cold forging press, hot forging press, powder

compacting hydraulic press, heating hydraulic press, deep drawing hydraulic press, servo press and so on . The plant is established in 1999 ,covers an area of 8,000 square meters. We are strictly implement the ISO9001 ,

CE, and SGS,BV management standards.Hydraulic press machine and servo press mainly applied to hardware, automotive, powder compacting,die casting, electronic, auto parts and other industries.

We can provide total solutions, including machines, molds, product processing technology, automated production lines.In the past two years, our powder metallurgy machines and forging presses have had the highest

sales volume. Next, we will analyze the advantages and disadvantages of powder metallurgy and forging presses to let customers know more clearly which process their products are suitable for.

    Powdered Metal Parts-Advantages of Powder Metallurgy:

Can produce parts from materials capable of high-temperature service and extreme durability at lower cost and at reduced difficulty. Think of stainless steels that are subject to high temperatures in exhaust systems, etc.

Can maintain high production rates for parts, even complex parts.

Machining is mostly unnecessary due to the net shaping capabilities of powder metallurgy. Less secondary machining means lower labor costs.High level of control is achievable using metal powders and sintering. This

allows fine tuning of electrical and magnetic properties, density, damping, toughness, and hardness.High-temperature sintering offers substantial improvements in tensile strength, bending fatigue strength, and impact


    Disadvantages of Powder Metallurgy:

Complex-shaped parts can also be challenging to make.Parts are generally not as strong or as ductile as cast irons or forged parts.

    Forged Metal Parts-Advantages of Forging:

Alters the grain flow of the material so that it flows with the shape of the part.

Creates parts that are stronger than other manufacturing processes. Forged parts are great for when failure would be dangerous or extremely inconvenient -- like gears in an automobile engine.

Can be made into most shapes.Can create very large parts.Relatively inexpensive compared to machining.

      Disadvantages of Forging:

Lack of control over microstructure.

Greater need for secondary machining, which adds to the project’s cost and lead time.

Cannot produce porous bearings, sintered carbides, or parts with a mix of multiple metals.

Cannot produce small, finely designed parts without machining

Die production is expensive, making the economics of short production runs undesirable.

    For these two processes, if you are not sure which process is suitable for your product, can you send the product to me? We will provide you with the most suitable product solution. If you have more questions,

pleasecontact WhatsApp: + 8613925853679 or email yh01@yhhydraulic.com

Post time: Oct-13-2023